全国统一热线:021-32205893
产品中心您的位置:网站首页 > 产品中心 > 德国宝德BURKERT > BURKERT宝德流量计 > 0131型直动式电磁阀,BURKERT阀门
0131型直动式电磁阀,BURKERT阀门
0131型直动式电磁阀,BURKERT阀门

简要描述:

0131型直动式电磁阀,BURKERT阀门
德国BURKERT宝德0131阀是直动式肘节阀。根据应用,可提供各种密封材料组合。由于执行器和流体之间的隔膜分离,腐蚀性介质(如酸和碱性溶液)也可以受到安全控制。该产品采用由PVC或PVDF制成的塑料外壳。线圈用耐化学腐蚀的环氧树脂模制。

0131型直动式电磁阀,BURKERT阀门
德国BURKERT宝德0131阀是直动式肘节阀。根据应用,可提供各种密封材料组合。由于执行器和流体之间的隔膜分离,腐蚀性介质(如酸和碱性溶液)也可以受到安全控制。该产品采用由PVC或PVDF制成的塑料外壳。线圈用耐化学腐蚀的环氧树脂模制。 “Kick and Drop”电子元件被嵌入所有直流变型中,以降低电力消耗。可选的电反馈功能可靠地检测开关位置。结合根据DIN EN 17301-803 Form A的插头,阀门满足防护等级IP65。
直接作用,介质分离阀,直径DN 25
防振,块螺旋线圈系统
所有DC版本的节能降耗
电气位置反馈提高安全性
坚固,服务友好的手动超控
对于选择正确的产品,请参考技术数据,图像和注释,以便根据数据表进行正确使用。
德国BURKERT宝德电磁阀性能特点
它是一种直动和先导式相结合的原理,当入口与出口没有压差时,通电后,电磁力直接把先导小阀和主阀关闭件依次向上提起,阀门打开。当入口与出口达到启动压差时,通电后,电磁力先导小阀,主阀下腔压力上升,上腔压力下降,从而利用压差把主阀向上推开;断电时,先导阀利用弹簧力或介质压力推动关闭件,向下移动,使阀门关闭。
德国BURKERT宝德电磁阀特点:1.在真空、负压、零压时能正常工作,但通径一般不超过25mm。
2.在零压差或真空、高压时亦可动作,但功率较大,要求必须水平安装。
1)常闭型,通电时电磁线圈产生足够的电磁力把运动部件(由磁芯、阀杆、上下部的膜片/密封件构成)从阀座上提起,阀门开启;断电时弹簧力把运动部件压在阀座上,阀门关闭。
2)常开型,动作方向与常闭型相反。
0131型直动式电磁阀,BURKERT阀门

Type 0131 - Direct-acting 2/2 or 3/2 way toggle valves

facebookgoogle plustwitter

Produkt-Foto Typ 0131

The depiction of the products may differ from the actual specific design.

  • Produkt-Foto Typ 0131
  • Produkt-Foto Typ 0131
  • Ersatzteil-Zeichnung Bürkert

Show articles

Type Description

The 0131 valve is a direct-acting toggle valve. Various seal material combinations are available depending on the application. Thanks to the diaphragm-separation between actuator and fluid body, aggressive media such as acids and alkaline solutions can also be safety controlled. The offering is rounded out with plastic housings made of PVC or PVDF. The coils are moulded with a chemically resistant epoxy. 'Kick and drop' electronics are moulded into all DC variants for reduced electrical power consumption. An optional electric feedback function reliable detects the switching position. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65.

  • Direct-acting, media-separated valve with diameter of up to DN 25
  • Vibration-proof, block screwed coil system
  • Energy-saving power reduction in all DC versions
  • Increased safety with electric position feedback
  • Robust, service-friendly manual override

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Can be combined with

Type 1078

Timer Unit

Type 2508

Cable Plug Form A


COPYRIGHT @ 2016 上海维特锐实业发展有限公司     网站地图    沪ICP备13015955号-31   GoogleSitemap    关于我们 新闻中心 产品中心 联系我们

电话:
021-32205893
手机:
13795311448
传真:
021-52500777
点击这里给我发消息
 

化工仪器网

推荐收藏该企业网站