MADAS马达斯安全阀，MADAS湖南总代理
德国MADAS马达斯安全阀VICO - VICP - VIC
P.MAX 1 BAR
安全阀具有积极作用，不由外部动力操作，旨在拦截燃油流向燃烧器以避免水温，在系统的输送回路上达到沸点温度值。
阀门的关闭是由以下原因引起的：
毛细管和/或灯泡传感器穿刺或切割。警告：在这种情况下，作为正动阀，不可能重新设置阀门。
增加水温直到达到设定值。在这种情况下，只有当温度从产品标签上规定的设定值降低至少10°C时才可以复位阀门
根据PED 2014/68 / EU指令
（前97/23 / EC）
I.N.A.I.L.认证和校准
根据2009年“RACCOLTA R”版本的认证 - DM 1.12.75 Titolo II的应用技术规格。
与每个阀门一起提供校准语言的原始副本。
本文件除了阀门技术文件外，还包含在密封件中报告的注册号太固定在阀体上。该文件由I.N.A.I.L.密封和验证。技术员谁出席了calybration。我们建议保持非常仔细，如果丢失，不可能释放任何副本。
根据指令97/23 / EC（PED指令）
I.N.A.I.L.认证和校准
根据2009年“RACCOLTA R”版本的认证 - DM 1.12.75 Titolo II的应用技术规格。
MADAS马达斯安全阀，MADAS湖南总代理

VICO - VICP - VIC
P.MAX 1 BAR

Safety valve with positive action, not operated by external power, manufactured with the aim to intercept the fuel flow to the burner to avoid the water temperature, on the delivery circuit of the system, reach the boiling temperature value.
The closure of the valves is caused by:
Capillary and/or bulb sensor puncture or cut. WARNING: Being positive action valves in this case it is not possible to reset the valve anymore.
Increasing of the water temperature till reaching the setted. In this case it is possible to reset the valve only if the temperature decreases of at least 10°C from the setting value stated on the product label
According to the Directive PED 2014/68/EU
(ex 97/23/EC)
I.N.A.I.L. Certified and calibrated
Certified according to "RACCOLTA R" ediction of 2009 - Application technical specifications of DM 1.12.75 Titolo II.
Together with every single valve an original copy of the calibration verbal is supplied. 
This document, in addition of the valve technical documentation, contains also the registration number reported in the seal too fixed on the body valve. The document is sealed and validated by the I.N.A.I.L. technician who attended the calybration. We suggest to keep it very carefully as in case of loss it is not possible to release any copies.

According to the Directive 97/23/EC (PED directive)

I.N.A.I.L. Certified and calibrated

Certified according to "RACCOLTA R" ediction of 2009 - Application technical specifications of DM 1.12.75 Titolo II.

MADAS马达斯安全阀，MADAS湖南总代理