KOBOLD型MIK流量计优势总代理
KOBOLD 新型KOBOLD型MIK流量计用于测量和监测管道中的中小流量导电液体。该设备根据电磁测量原理工作。根据法拉第磁感应定律，在穿过磁场的导体中感应电压。导电测量剂用作移动的导体。
测量介质中感应的电压与流速成正比，因此是体积流量的值。流动的介质必须具有zui小的导电率。感应电压由两个与测量介质接触并传送到测量放大器的传感电极拾取。流量将根据管道的横截面积计算。
测量不依赖于工艺液体及其材料特性，如密度，粘度和温度。该设备可能配备了开关，频率或模拟输出。此外，还有一个小型电子系统可供选择，其中包含一个开关和一个模拟输出。该设备系列由可选的配料和计数电子系统完成。
计数器电子系统显示显示屏*行的当前流量，并显示第二行的部分或整体体积。计量电子系统控制简单的灌装工作，并测量流量，总体积和灌装量。模拟输出和两个继电器输出可用于进一步处理信号。
磁感应流量计/监测仪MIK
测量范围：0.05 - 1.0 - 35 - 700 l / min液体
连接：G?... G2?外螺纹
材料：PPS /不锈钢，PVDF /哈氏合金，钽
pmax：10巴
zui高温度：80°C
准确度：满量程的±2％
开关点，频率或模拟输出
LED指示与2开放收藏家或
4 - 20 mA / 1集电极开路，计数器，配料器
KOBOLD型MIK流量计优势总代理

The new KOBOLD flow meter Type MIK is used for measuring and monitoring smaller and medium-sized flow of conductivity liquids in pipes. The device operates according to the  electromagnetic measurement principle. According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor.

The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing  media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier. The  flow rate will be calculated based on the cross sectional area of the pipe.

The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature. The device may be equipped with a switch, frequency or analogue output. Moreover, there is a compact electronic system to be selected from, which contains a switch and an analogue output. The device series is completed by an optionally obtainable dosing and counter electronic system.

The counter electronics system shows the current flow rate on the first line  of the display and shows the partial or overall volume on the second line. A dosing electronic system controls simple filling duties and also measures the flow rate, overall volume and filling volume. The analogue output and two relay outputs can be utilised for the further processing of signals.

Magnetic Inductive Flowmeter/-monitor MIK

Measuring range: 0.05 - 1.0 ... 35 - 700 l/min liquid
Connection: G ½ ... G 2¾ male thread
Material: PPS/stainless steel, PVDF/Hasloy, tantalum
pmax: 10 bar
tmax: 80°C
Accuracy: ±2 % of full scale
Switchpoint, frequenz or analogue output
LED-Indication with 2 open collectors or
4 - 20 mA/1 open collector, counter, batcher

KOBOLD型MIK流量计优势总代理