BURKERT直动式6012型柱塞阀授权总代理

德国BURKERT宝德6012型 - 柱塞阀3/2路直动式

Produkt-Foto Typ 6012

产品的描述可能与实际的具体设计不同。

Produkt-Foto Typ 6012

德国宝德BURKERT直动式电磁阀类型说明

密封和柱塞导管焊接在一起，以增强耐压性和密封性。根据应用，可提供各种密封材料组合。 Bürkert*的法兰设计（SFB）可实现空间与班卓螺栓的班卓琴连接是轻松直接安装在气动驱动器上的理想解决方案。带有班卓螺栓的班卓琴连接是易于直接安装在气动驱动装置上的理想解决方案。结合符合DIN EN 17301-803表B或C的插头，阀门满足防护等级IP65。

直动式紧凑型小型阀，直径DN 1.6

螺纹线圈系统

Banjo螺纹连接，可直接安装在气动阀上

简单快速的推入式，法兰式或歧管式安装

服务友好的手动覆盖

如需选择正确的产品，请参阅技术数据，图像和注释，以便根据数据表正确使用。

BURKERT直动式6012型柱塞阀授权总代理

Type 6012 - Plunger valve 3/2 way direct-acting

PrintShare

Link was copied

The depiction of the products may differ from the actual specific design.

Show articles

Type Description

Valve 6012 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. A banjo connection with banjo bolt is the ideal solution for easy direct mounting on a pneumatic drive. Optional manual actuation enables quick commissioning and optimal maintenance. In combination with a plug in accordance with DIN EN 17301-803 Form B or C, the valves satisfy protection class IP65.

• Direct-acting, compact small-format valve with diameter of up to DN 1.6
• Screwed coil system
• Banjo threaded connection for direct mounting on pneumatic valves
• Simple and quick push-in, flange, or manifold installation
• Service-friendly manual override

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

BURKERT直动式6012型柱塞阀授权总代理