全国统一热线：021-32205893
PILZ安全光幕/安全光栅用于冲压机安全防护的产品种类
德国PILZ皮尔兹安全光栅压机安全防护
压机上的出入防护
需要坚固耐用、性能等级高且响应快速的光幕为压机提供安全保护。带手指保护功能的光幕保护您的员工免受压机伤害！当光幕在其受保护区域内探测到手指时，压机会立即安全地停止运行。
适合您需求的光幕：
4类光幕PSENopt II，手指保护
冲压线的多面安全防护
大型冲压线需要定期更换模具。例如，可通过轨道将模具输入或输出压机。这种情况下，必须为入口和出口区提供安全防护。节省空间、成本和安装时间！只需将一对光幕与两个反射镜柱组合。反射镜柱可反射光幕的红外光束。只需要一对光幕就可以实现三个监控侧面的安全防护！
机器人单元上的出入防护
机器人单元上的出入防护
您想在不使用防护栏的情况下为机器人单元提供出入防护吗？安全光幕 适合需要无障碍出入的应用。光幕可以监控是否有人出入危险区，并在探测到有人出入时立即安全地关闭机器人。只有在通过控制器确认后才能重启机器人。
适合您需求的光幕：
3类光幕PSENopt II，身体保护
PILZ安全光幕/安全光栅用于冲压机安全防护的产品种类
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 300 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 900 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 1650 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4 ,PL e, hand protection (resolution 30 mm) Protected field height 150 mm, supply voltage 24 V. Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 1050 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 450 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 1500 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit
PILZ安全光幕/安全光栅用于冲压机安全防护的产品种类
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 300 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 900 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 1650 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4 ,PL e, hand protection (resolution 30 mm) Protected field height 150 mm, supply voltage 24 V. Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 1050 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 450 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit.
Safety light barrier, type 4, PL e, hand protection (resolution 30 mm) Protected field height 1500 mm, supply voltage 24 V, without dead zone Connector: M12, sender: 5-pole, receiver 5-pole Connection cable not supplied with the unit
|
||
|
||
 |
