BURKERT电磁阀-2/2路电磁阀产品优点
德国BURKERT宝德2/2路电磁阀低
高温
交付了2610型直动式阀门
电路功能常闭。热量
通过手段隔离线圈和外壳
不锈钢波纹管允许
中等温度。这样凝结
或线圈的不可接受的升温
避免。附带的电缆头包含一个
“踢和放”电子支持
开放阶段和之后的减少
打开控股权。
电路功能A
2/2路直动式电磁阀，
通常关闭
BURKERT电磁阀-2/2路电磁阀产品优点
BURKERT电磁阀其他技术规格
直径
[mm]的
Kv值
水[m3 / h]
连接
范围
压力[bar]
功耗响应时间
呼叫[W]保持[W]打开
[MS]
关闭
[MS]
6.0 0.8 G 1/4，NPT 1/4 0-10 72 4 100至200 300至500
8.0 0.9 G 1/2，NPT 1/2 0-10
12.0 1.8 G 1/2，NPT 1/2 0-3.5
流量：Kv值水[m3 / h]
在+ 20°C，排气口入口和出口处测量压力为1 bar
压力值[bar]
与大气压力相关的超压
有时间了
响应[毫秒]
在6巴和+ 20°C时测量水流量
开盘
关闭
压力从0上升到90％，
压力从100降至10％

The depiction of the products may differ from the actual specific design.

Type Description

The 2610 valve is a direct-acting, media-separated plunger valve. Thermal and hermetic isolation of coil and housing by means of a stainless steel bellows enables both extreme media temperatures and aggressive media. The coils are moulded with chemically resistant epoxy. Therefore, the valve is especially well suited for applications with critical media. The cable plug with 'Kick and Drop' electronics included in the scope of supply supports the valve opening process and reduces current to the holding power after opening. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65 – in combination with the stainless steel housing NEMA 4X.

• Direct-acting, media-separated valve with diameter of up to DN 12
• Welded metal bellows system (316Ti)
• High-quality PTFE seat seal
• Media temperature from -200 °C to +180 °C
• Energy-saving 'Kick and Drop' electronics

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

BURKERT电磁阀-2/2路电磁阀产品优点