MN28系列电磁阀,MADAS自动电磁阀
MADAS自动电磁阀  P.MAX 8 BAR
马达斯MADAS自动电磁阀（在张力下打开，关闭时）不适合检测瓦斯油。
MN28系列电磁阀设计在zui恶劣的工作条件下非常可靠。 它有一个很大的通道，所以低负载损失。 其特殊结构不会因为上游压力强或下游压力下降而引起针刺。
其结构非常好，采用压铸铝结构，玻璃密封器具和所有部件直接接触流体，由黄铜和不锈钢制成。
如果与其他膜伺服控制型号相比，MN28电磁阀即使在环路电路中也能停止工作，差压上下游压力为0至8 bar。
开启和关闭速度允许使用需要流体剂量的Madas电磁阀。

MN28
P.MAX 8 BAR

Automatic solenoid valve (it opens when under tension and closes without) suitable to detect gas oil.
The MN28 series solenoid valve is conceived to be very reliable in the hardest working conditions. It has a large section of passage and so a low load loss. Its particular construction doesn’t permit pin stick due to either strong upstream pressure or strong downstream depression. 
Its construction is very good with a die-cast aluminium structure, viton seal organs and all parts in direct contact with fluid, made of brass and stainless steel.
If compared to other membrane servo-controlled models the MN28 solenoid valves can work non stop even in ring circuits with differential upstream and downstream pressure from 0 to 8 bar. 
The opening and closing rapidity permits to use the Madas solenoid valves where a precise fluid dosage is needed.

In conformity with:

2014/68/EU PED Directive
(ex 97/23/EC)

2014/30/EU EMC Directive
(ex 2004/108/EC)

2014/35/EU LVD Directive
(ex 2006/95/EC)

MN28系列电磁阀,MADAS自动电磁阀
MN28系列电磁阀,MADAS自动电磁阀