Vis Hydraulics液压安全阀，RVB0.M16
VIS阀门直接作用 - 提升型
描述
一个螺丝，墨盒式，直接作用，提升型，通常
闭式液压安全阀。
它通常用于保护液压元件免受压力
瞬变。
当入口（1）的压力达到阀门设定值时，
阀开始打开到罐（2），提供有限的压力上升。
尺寸减小和响应时间
阀门非常适合于先导电路。
滞后也非常低。
技术特点
所有外表面均镀锌，防腐蚀。
所有阀门零件均由高强度钢制成。 提升器硬化
并保持zui小的磨损和延长使用寿命。
如果调节螺丝从阀门中退出，则无外部
预计泄漏（密封弹簧座）
可选弹簧范围为450巴（6700 psi）
油箱端口（端口2）上的背压直接与之相加
阀门设置为1：1比例。
公制腔。
Vis Hydraulics液压安全阀，RVB0.M16

RVB0.M16 Valve Series

METRIC Cartridge - 450 bar
Direct acting - Poppet Type

Description
A screw-in, cartridge style, direct acting, poppet type, normally
closed hydraulic relief valve.
It’s typically used to protect hydraulic components from pressure
transients.
When the pressure at the Inlet (1) reaches the valve setting, the
valve starts to open to tank (2) providing a limited pressure rise.
The reduced dimensions and the excellent response time make this
valve ideally suited for pilot circuits.
Hysteresis is also extremely low.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to guarantee minimal wear and to extend service life.
In case adjustment screw is backed out of the valve, no external
leakage is expected (sealed spring seat)
Optional spring ranges to 450 bar (6700 psi)
Back pressure on the tank port (port 2) is directly additive to the
valve setting at a 1:1 ratio.
Metric cavity.

Vis Hydraulics液压安全阀，RVB0.M16